Product Description
PH160-80
80 Gallons BTU range 40,000-160,000
The Phoenix water heater, by HTP (Hot Water Treatment, Inc.) is a highly efficient and extremely versatile gas fired water heater. It is manufactured with super durable stainless steel materials to last longer and provide optimum heat transfer. With up to 96% Thermal Efficiency and a 5 to 1 turn-down, the Energy Star rated Phoenix Water Heater is a great choice for your heating needs.
The Phoenix is available in three gallon sizes (55, 80, 119) and four BTU inputs ranging from 100,000 to 199,000. It is suitable for both residential and commercial applications.
The Phoenix is backed by a limited 7 year residential warranty and 3 year commercial warranty
A Better Experience with Every Installation
The Phoenix has a light weight tank for easier installation. It vents in inexpensive PVC and CPVC. Power vent or direct power vent options are available. These units come with intake PVC tee with screens and exhaust PVC coupling with screens. LP conversion kits are also included if needed (natural gas models only).
Energy Efficient
According to Energy Star, heating water accounts for 15% of a home’s energy use. HTP high efficiency water heaters consume anywhere from 10-50% less energy than standard models. The Energy Star certified Phoenix water heater has up to a 96% thermal efficiency rating. This means that 96 cents of every dollar is used toward heating, compared to a standard efficiency unit, which at 60% efficiency means only 60 cents of every dollar goes toward heating. The Phoenix water heater’s modulating burner operates at a five to one turndown ratio, which provides high system efficiency even during low load conditions. This water heater also complies with SCAQMD Rule 1146.2 – ultra low NOx emissions – making it eco-friendly.
High Efficiency Heat Exchanger
• Copper Nickel primary with 800 H and Copper Nickel secondary tube construction
• Gasketless heat exchanger design
Combustion System
• Modulating burner with up to 5 to 1 turndown
• High-Grade Inconel premix burner
• Spark ignition
• Fires on Natural or LP Gas with included conversion kit
• Dual flame monitoring (Spark and Flame probe)
• Flame stabilization monitoring – Automatic adjustment of
firing rate to stabilize flame signal
Integrated Control System
• Digital operating control with LCD display three character
for temperature and system monitor - LCD indicators for
appliance faults (red light) and operation (green light)
• System parameters password protected
• Outdoor reset
• 120 volt 5 amp electrical connection for condensate pump
• 0-10 volt input for Building Management System
• Dry contact for alarm output
• Outdoor sensor input
• Computer monitor cable allows user to monitor system
parameters – fault history – graphical monitor of system
operation
Stainless Steel Tank
• Tank construction of 316 L stainless steel
• System return tube with screen for built-in dirt and air
separation
• High Temperature Switch
• 1” system return and supply connection for 55 gallon models
• 1 ½” system return and supply connection for 80 and 119
gallon models
• Pressure relief port
• Top and bottom sensor
• Built-in low water cut-off probe
Specialized Features
Sanitizer Models
• Set to 184 oF operating temperature with an adjustable 2 oF
differential for sanitation purpose
Multi-Fit Models
• Additional top connections and shorter height increase
installation flexibility
• 1 ½” system return and supply connections
Additional Features
• Vents in PVC - CPVC - stainless steel – ULC S636 flexible
polypropylene vent liner (chimney lining only)
• Vents up to 200 combined equivalent feet in 3” venting (up
to 85 combined equivalent feet in 2” venting)
• Built –in condensation system
• Manual reset high limit
• NSF Listed
• Low NOx emissions – SCAQMD Certified
• Lead Free Compliant, as required by the Safe Drinking
Water Act, Section 1417
Optional Equipment
Outdoor Sensor (Part # 7250P-319)
2” PVC Concentric Vent Kit (Part # KGAVT0501CVT)
3” PVC Concentric Vent Kit (Part # KGAVT0601CVT)
2” Stainless Steel Termination Vent Kit (Part # V500)
3” Stainless Steel Termination Vent Kit (Part # V1000)
4” Stainless Steel Termination Vent Kit (Part # V3000)
Condensate Neutralizer (Part # 7450P-212)
PC Connection Cable w / Software (Part # 7250P-738)
Specifications:
